Valve Adjustment Rotate crankshaft until No. 1 piston is at TDC on compression stroke (intake and exhaust valves closed).NOTE: During adjustment of valves, check position of balls in ends of...
Category: Hyster/Yale
This code is set when the engine is running too rich or too lean. There could be several issues, I would start with monitoring the oxygen sensor voltage and see if it is staying above .5 volts (rich)...
These error codes set when the diesel exhaust filter needs to be cleared by performing a regenerative procedure. CODES DTC 3701-15 - Excessive Particulate Matter 3DTC 3701-16 - Excessive...
DTC 523592-2 - Regeneration Switch Message Error POSSIBLE CAUSEA. CANBUS COMMUNICATION FAULTB. ACU FAULT COMPONENT OPERATIONAL CHECKPROCEDURE OR ACTION: Turn power to OFF for no less than 30...
This pinout and schematic is applied to the Hyster and Yale internal combustion lift truck with a VSM present behind the right side of the dash. The pins that are filled on each plug is dependent on...
This is a very common error code and is easily misdiagnosed, Although, most of the time it is a sensor fault, there are times that the wiring going to the steer axle has been damaged. Occasionally...