Calibrate Guidance Control System Verify that the sensors are bolted securely to the truck, centered from side to side in the truck,and that the bottoms of the sensors are 85.725 ±3.175 mm...
Category: Hyster/Yale
ERROR CODES DTC 64974 - FOC2 Traction Controller Initial Nominal Motor Voltage HighDTC 64798 - FOC2 Traction Controller Operating Nominal Motor Voltage LowDTC 64799 - FOC2 Traction...
The following article applies to the following error codes for every temperature sensor on the Hyster/Yale forklifts. Codes DTC 110-0 - Engine OverheatDTC 110-3 - Coolant Temperature Sensor...
DTC 4117 FOC Configuration MismatchPOSSIBLE CAUSEA. SOFTWARE CONFIGURATION FAULTB. INCORRECT CDF SETUPC. BAD SERVICE BRAKE POSITION SENSORD. CONTROLLER FAULTCOMPONENT OPERATIONAL...
Valve Adjustment Rotate crankshaft until No. 1 piston is at TDC on compression stroke (intake and exhaust valves closed).NOTE: During adjustment of valves, check position of balls in ends of...
This code is set when the engine is running too rich or too lean. There could be several issues, I would start with monitoring the oxygen sensor voltage and see if it is staying above .5 volts (rich)...