Calibrate Guidance Control System Verify that the sensors are bolted securely to the truck, centered from side to side in the truck,and that the bottoms of the sensors are 85.725 ±3.175 mm...
Category: Tech Tips
Allis Chalmers - Gas: Right-hand side on the frame in engine compartment Elec.: Left-hand side on the frame in the front ATM – on top of the frame Automatic – LP &...
Encoder Operation and Testing Encoders are used for many different functions during lift truck operation. The basic principle of the encoder is to convert mechanical motion into a digital...
Nissan K21/25 Engine Control Components Inspection and Testing
Engine control component testing on the Nissan K21/K25 found in Caterpillar, Mitsubishi, Unicarriers, and Komatsu forklifts.
Adjusting Valve Clearance Perform adjustment when engine is hot and not running. Start engine and warm to operating temperature. Remove the rocker cover. Turn the crankshaft until number...
Fuel pressure gasoline [(kPa, bar, kg/cm2, psi)]At idle: 353 kPa (3 .53 bar, 3 .6 kg/cm², 51 psi) Idle speed (rpm)A/T model (at N position)700±50Ignition timing (°BTDC/rpm)A/T model (at N...