This error code if for a Toyota walkie pallet. Code E115 is a Main Contactor Fault. Contact tips might be welded together, one way to test this it to visually inspect the contact tips and see if...
Tag: forklift error codes
Hyster Yale Fortis Veracitor Transmission Pressure Error Codes
These codes will set when a major electrical component such as the VSM has been replaced. Also, when the transmission gets to high hours the transmission may need calibrated due to...
This code is set when the fingertip hydraulic levers are out of range when the key is turned on. Moving each lever back and forth will usually clear the code until the key is cycled again. To reset...
TOSS/TISS Sensor Signal Intermittent/No Output TISS - Transmission Input Speed SensorTOSS - Transmission Output Speed Sensor Transmission Output Speed Not Proportional to Transmission Input...
Engine damage can result from an electrical current passing through the cooling system. Many engine failures due to problems in the cooling system are caused by an electrical current passing...
Troubleshooting MUST start out simple. Basic troubleshooting of common problem areas provides a good starting point, but simple things should not be overlooked; battery charge, corroded or loose...